Experimental and Numerical Investigation of Heat Transfer of TiN/TiCN/TiC Deposited on Cp-Ti and Ti6Al4V substrates materials
Keywords:
Cp-Titanium, Ti6Al4V, TiN/TiCN/TiC, Heat transfer, ANSYS Fluent, Numerical AnalysisAbstract
Experimental and numerical analysis on heat transfer characteristics of TiN/TiCN/TiC coating was investigated in this study. The TiN/TiCN/TiC coating was deposited on commercially pure Titanium (Cp-Ti) and Ti6Al4V substrates using a magnetron sputtering technique. The structural and chemical characterization of the coating was analyzed by X-ray diffraction (XRD). Results of the XRD analysis showed reflections corresponded to cubic and polycrystalline structure for TiN/TiCN/TiC films. Test specimens were placed in the heat conduction equipment and heat analyzes were performed experimentally. In addition to experimental investigation, numerical studies of coated substrate materials have been performed under the same experimental conditions with the ANSYS Fluent program.
Downloads
Published
Issue
Section
License
The authors keep the copyrights of the published materials with them, but the authors are aggee to give an exclusive license to the publisher that transfers all publishing and commercial exploitation rights to the publisher. The puslisher then shares the content published in this journal under CC BY-NC-ND license.
